Antrim Shale

From SourceWatch
Jump to: navigation, search

This article is part of the FrackSwarm portal on SourceWatch, a project of CoalSwarm and the Center for Media and Democracy. To search by topic or location, click here.

This article is part of the FrackSwarm coverage of fracking.
Sub-articles:
Related articles:

The Antrim Shale is a formation of Upper Devonian age in the Michigan Basin, in the US state of Michigan, and extending into Ohio and Indiana. It is a major source of natural gas in the northern part of the basin.

The Antrim Shale was defined by A. C. Lane in 1901, and named for type-section exposures in Antrim County, Michigan. The formation was previously known as the St. Cleric Shale in Michigan, and the Genessee Shale in Indiana.[1]

Stratigraphy

The Antrim is a brown to black, pyritic, and organic-rich shale, from 60 to 220 feet thick. Total organic content varies from 1% to 20%. In some places the unit includes a gray calcareous shale or limestone, and in places a fine-grained sandstone at the base.

The formation is called the Kettle Point Formation in Ontario, and is the stratigraphic equivalent of the New Albany Shale in the Illinois Basin. It is overlain by the Bedford Shale, and underlain in some areas by the Jordan River Formation, and elsewhere by the Thunder Bay Limestone.

Natural gas

776px-Shaleusa2.jpg

The Antrim Shale, is a major source of shale gas, and produces natural gas along a swath across the northern part of the state.[2] Most natural gas production is in Antrim, Crawford, Montmorency, Oscoda and Otsego counties.[3]

Although the Antrim Shale has produced gas since the 1940s, the play was not active until the late 1980s. During the 1990s, the Antrim became the most actively drilled shale gas play in the US, with thousands of wells drilled. To date, the shale has produced more than 2.5 TCF from more than 9 thousand wells. Antrim Shale wells produced almost 140 cubic feet in 2006.

GasDepositDiagram.jpg

The shale appears to be most economic at depths of 600-2,200 feet. Original gas content ranges from 40 to 100 standard cubic feet per ton. Wells are developed on units of from 40 acres to 160 acres.[4] Horizontal drilling is not widely used. Antrim Shale wells often have to pump much initial water before gas production becomes significant, a behavior also seen in many coalbed methane wells.

Unlike most other shale gas plays, the natural gas from the Antrim appears to be biogenic gas generated by the action of bacteria on the organic-rich rock.[5] Also unlike most other shale plays, the Antrim Shale is thermally immature in the gas-productive trend.[6]

In 2007, the Antrim gas field produced 136 billion cubic feet of gas, making it the 13th-largest source of natural gas in the United States.[7]

Resources

References

  1. Indiana Geological Survey, Antrim Shale, accessed 4 November 2009.
  2. Michigan DEQ map: Antrim, PDF file, downloaded 12 February 2009.
  3. Michigan State University, Oil and Gas, accessed 3 November 2009.
  4. US Department of Energy, Modern Shale gas Development in the United States, April 2009, p.17.
  5. Sally Pobojewski, "Antrim shale could hold bacterial answer to natural gas supply," The University Record (University of Michigan), 17 September 1996, accessed 3 November 2009.
  6. Jeff Salacup, Anaerobic biodegradation of organic matter in the Devonian Antrim Shale, PDF file, retrieved 4 November 2009.
  7. US Energy Information Administration, Top 100 oil and gas fields, PDF file, retrieved 18 February 2009.

Related SourceWatch articles

Wikipedia also has an article on Antrim Shale. This article may use content from the Wikipedia article under the terms of the GFDL.